Description

Zenith Calm Porcelain Tile

The Zenith Calm Porcelain Tile brings a sense of peace and sophistication to any interior. Designed with subtle veining and calming hues, this tile complements both minimalist and luxurious decor styles. The high-gloss surface reflects light beautifully, making your rooms appear more open and elegant.

Whether you’re upgrading your home, hotel, or spa, this tile offers the perfect blend of style and durability. Made in China using advanced porcelain technology, it ensures lasting quality and easy maintenance.

Specifications

Tile Installation Guide

1. Prepare the Surface

• Ensure the subfloor or wall is clean, dry, and level.

• Remove any dust, paint, oil, or debris to help the adhesive bond properly.

• If necessary, apply a primer to improve adhesion.

2. Plan Your Layout

• Measure the area and mark guidelines using a chalk line to ensure a straight layout.

• Dry-lay a few tiles without adhesive to visualize the pattern and check for even spacing.

• Start from the center of the room or a focal point for a balanced look.

3. Mix and Apply Tile Adhesive

• Use a high-quality thinset mortar suitable for porcelain tiles.

• Apply adhesive with a notched trowel in small sections to prevent it from drying too quickly.

• Maintain an even layer for a level surface.

4. Lay the Tiles

• Press tiles firmly into the adhesive, using tile spacers between each tile to maintain consistent grout lines.

• Tap gently with a rubber mallet to ensure full contact and eliminate air pockets.

5. Cut Tiles for Edges and Corners

• Use a wet saw or tile cutter to cut tiles as needed to fit around walls, corners, or fixtures.

• Always measure twice to ensure accurate cuts and reduce waste.

6. Allow to Set

• Let the adhesive cure for at least 24 hours before walking on the tiles or applying grout.

7. Apply Grout

• Remove spacers and apply grout using a rubber float, pressing it into the joints.

• Wipe off excess grout with a damp sponge, cleaning the tile surface thoroughly.

• Allow the grout to cure according to the manufacturer’s instructions.

8. Final Cleaning & Sealing

• Once the grout is fully dry, clean the tiles with a soft cloth or sponge.

• Apply a grout sealer if recommended, especially in wet areas, to prevent stains and moisture.